Setting up the Release Station

222 views 0

To prepare the device for use, proceed as follows:

  1. Plug the micro USB connector of the supplied power unit into the Release Sta­tion with the USB icon facing down.

    insert the micro USB plug into the device with the USB icon facing down

  2. Connect the other cables required for connecting the printers to the Release Sta­tion: network cable and/or USB printer cables.
  3. Plug the power supply unit into the wall outlet (if necessary, use one of the sup­plied power adapters); the red LED on the front cover lights up.
Previous Page
Next Page

Was this helpful?