Central administration
Here the central administration can be enabled and disabled via the NoTouch Center.
Caution! If central management is enabled, all settings previously made on the Hub are reset.
Alternative administration URL
This menu item allows you to enter an alternative address at which the ThinPrint Hub should contact you in the future. For example, the Hub is used in a location without a VPN connection and should report to the public IP of the NoTouch Center after its initial setup.
Interval of the settings query
The time interval at which the ThinPrint Hub should ask for new settings can be specified under Management Anncounce Interval (Minutes).
Type of IP address
Here you can determine which IP address is linked to the ThinPrint Hub when you click the globe icon in the NoTouch Center.
The possible options are:
- Internal IP → IPv4 address of the ThinPrint Hubs
- External/Visible IP → address recognized by the NoTouch Center (can also be an IPv6 address depending on the network)
- No Setting → default setting corresponds to External/Visible IP
ThinPrint Hub Firmware
- The firmware version to be used can be selected here. How to upload the corresponding files is described in Distributing firmware updates.
Only updates are possible. Downgrades are not supported.