Firmware versions

530 views 0

Find a list of the ThinPrint Hub’s firmware versions below.

Firmware version Release date Update file name Comments
1.0.51 April 2016 first official release version 1.0
1.0.54 June 2016 firmware-update-1.0.54-1.0.51.tgz • fix: following a disruption, the Hub’s ThinPrint Client didn’t automatically reconnect to the Connection Service
• extended logging
• update possible from firmware ver­sion 1.0.51
1.0.60 October 2016 firmware-update-1.0.51-1.0.60.tgz • fix: LPD printing failed with some printer drivers
• fix: In some cases, special docu­ments could not be printed at all, or pages were missing.
• updates possible both from firm­ware versions 1.0.51 and 1.0.54
1.1.27 October 2016 firmware-update-1.0.51-1.1.27.tgz • Personal Printing Client v1.0.52
(with NFC card reader on USB)
• new PowerShell cmdlets:
• logs can be sent to a syslog server
• firmware can be downloaded from:­date
• updates possible from firmware ver­sion 1.0.51 or later
1.1.28 March 2017 firmware-update-1.0.51-1.1.28.tgz • Personal Printing Client v1.0.54
• fix: After about three days of up-time, Hub didn’t read card IDs anymore if an ACS reader was used.
• fix: If sometimes LPD printing didn’t work, any printer setting had to be modified or a printer had to be added or removed to rewrite the thnu­clnt.conf file.
• updates possible from firmware ver­sion 1.0.51 or later
1.2.23 July 2017 firmware-update-1.0.51-1.2.23.tgz • SNMP monitoring for printers added
• SNMP monitoring for the Hub added
• support for IEEE 802.1x authentica­tion added for the Hub logging on to other devices
• fix: printing to Hub with Connection Service could be delayed for about 60 seconds
• updates possible from firmware ver­sion 1.0.51 or later
1.2.25 October 2017 firmware-update-1.0.51-1.2.25.tgz • updates possible from firmware ver­sion 1.0.51 or later
A direct update from firmware ver­sions 1.0.51–1.2.23 to firmware version 1.3 via file is not possible.
1.3.9 October 2017 firmware-update-1.2.25-1.3.9.tgz • new: Find Printers option for search­ing network printers
• fix: When setting up IEEE 802.1X authentication with PEAP for the first time, the configuration can not be saved.
• Firmware update is possible from version 1.2.25 to 1.3.9 only
1.3.11 Decem­ber 2017 firmware-update-1.2.25 – 1.3.11.tgz • fix: Hub randomly disconnects from Connection Service
• Firmware update is possible from 1.2.25 or later
1.4.21 Febru­ary 2018 firmware-update-1.2.25 – 1.4.21.tgz • new: printers found by the hub can be automatically added to the printer list
• Fix: module TPHubPS.Update.dll for updating versions 1.2.23 to 1.3.11 with PowerShell
• new PowerShell cmdlets:
• Firmware update is possible from 1.2.25 or  later
1.5.19 June 2018 firmware-update-1.2.25 – 1.5.19.tgz • new: Up to four type-1252 card readers can be connected.
• new: Server check button for Per­sonal Printing
• new PowerShell cmdlets:
• changed PowerShell cmdlets:
• Hub web server now supports only TLS 1.1 and 1.2
• Firmware update is possible from version 1.2.25 or later
1.6.4 July 2018 firmware-update-1.2.25 – 1.6.4.tgz • fix: huge print jobs got deleted when printer ran out of paper
• fix: security issues
• Hub web server now supports only TLS 1.2
• Firmware update is possible from version 1.2.25 or later
1.7.14 December 2018 firmware-update-1.2.25-1.7.14.tgz • fix: When the Hub was rebooted, in any case when disconnected from power supply, printers with their IDs – connected to USB – were sometimes assigned to different USB ports.
• PowerShell module TPHubPS.dll provided in Microsoft’s PowerShell Gallery
• update of ThinPrint Client Linux (thnuclnt)
• Firmware update is possible from version 1.2.25 or later
1.8.29 July 2019 firmware-update-1.2.25-1.8.29.tgz • support of Stratodesk NoTouch Center
• new PowerShell cmdlets:
• Firmware update is possible from version 1.2.25 or later
Please note that you can not directly update from 1.3.9 and 1.3.11 to 1.8.29. The firmware package 1.8.29 is somewhat bigger than other versions, and 1.3.x cannot handle files of that size. From 1.3.x, you must first update to 1.4.21, 1.5.19, 1.6.4 or 1.7.14. In a second step, you can update to 1.8.29 or later.
1.9.12 September 2019 firmware-update-1.2.25-1.9.12.tgz • new test und sync functions:
Hub→ Stratodesk Notouch Center
Hub→ ThinPrint Connection Service
• new PowerShell cmdlets:
• Hub Finder shows the firmware version per Hub
• Firmware update is possible from version 1.2.25 or later
1.10.34 May 2020 firmware-update-1.2.25-1.10.34.tgz • introduction of ezeep Hub: one firmware for both types of Hub: ezeep Hub and ThinPrint Hub
• Cloud Connect feature added: for reaching local printers (without own ezeep client) from ezeep for Azure cloud
1.11.8 September 2020 firmware-update-1.2.25-1.11.8.tgz Update for ThinPrint Hub and ezeep Hub but features relevant for ezeep Hub
• All printers the ezeep Hub finds are automatically reported to the ezeep Cloud.
• The ezeep Hub not only detects network printers automatically but also USB printers.
• Stratodesk NoTouch Center disabled for ezeep Hubs
1.13.27 August 2021 firmware-update-1.2.25-1.13.27.tgz • allows ezeep Blue customers to register (“claim”) their ezeep Hubs in the cloud and manage them via the ezeep Blue admin portal.
• bugfix: After a couple of hours, the reconnect in the Hub didn’t work immediately.
1.16.94 September 2022 firmware-update-1.2.25-1.16.98.tgz Only for ezeep Hubs:
• Pull Printing feature
• Cloud Management of HubsOnly for ThinPrint Hubs:
• Personal Printing vs. Pull Printing: ThinPrint Hub can do Personal Printing as before (als Personal Printing Release Station). If your organization uses ezeep Blue, you can switch the Hub to use ezeep’s Pull Printing (instead of Personal Printing).
• backend: Personal Printing uses TLS 1.2 now.
• Cloud Management: The feature is visible in the configuration UI but disabled (also after update and factory reset). Enabling this feature is only useful if your organization uses ezeep Blue as well, and if you like to manage the Hub from the ezeep Blue admin portal.

New PowerShell cmdlets:
Connect-TPHubEzeep alias Connect-Ezeep
Disconnect-TPHubEzeep alias Disconnect-Ezeep

Note! For Hubs with older firmware versions – e. g. with one of the beta ver­sions 1.• 0.13 or 1.0.31 – please use our free replacement service:

Previous Page
Next Page

Was this helpful?