Setting up the Hub

1089 views 1

To set up and prepare the ThinPrint Hub for use, proceed as follows:

  1. Plug the micro USB connector of the supplied power unit into the ThinPrint Hub with the USB icon facing down.
    Insert the micro USB plug into the device with the USB icon facing down

    Insert the micro USB plug into the device with the USB icon facing down

  2. Connect the other cables required for connecting the printers to the Hub: net­work cable and/or USB printer cables.
  3. Plug the power supply unit into the wall outlet (if necessary, use one of the sup­plied power adapters); the red LED on the front cover lights up.
    LEDs on the front cover of the Hub: Red = Power is on; Green = Identifies the device

    LEDs on the front cover of the Hub:
    red = power is on | green = identifies the device

Previous Page
Next Page

Was this helpful?