Installing the web server certificate on the Hub

177 views 0

  • Switch to the web interface of the Hub. To import the certificate, select Upload Certificate.Hub: importing the web server certificate
    Hub: importing the web server certificate
  • Enter the password specified above.Hub: entering the key’s password

    Hub: entering the key’s password

  • Assign the certificate to the Hub’s web interface.Hub: certificate assigned to the web interface

    Hub: certificate assigned to the web interface

  • To restart the Hub, select SystemReboot.
  • If applicable, install Hub’s root certificate on workstations (if it is not prein­stalled by default) in the Trusted root certification authorities and/or Third-party root certification authorities certificate store and, if applicable, the intermediate certificate in Intermediate certification authorities.
  • After installing the root certificate on a workstation, you can open the web inter­face of the Hub via https. Select the same address that you used to create the certificate (here: https://TPHub-675f8d).workstation: opening the web interface of the Hub via https (here: using a Chrome browser)

    Workstation: opening the web interface of the Hub via https (here: using a Chrome browser)

Previous Page
Next Page

Was this helpful?